Quick Info :
16 bi-directional channels
Can be used as multiplexer or demultiplexer
Channels can handle analog or digital signals
$ 0.01
Quick Info :
WIDE SUPPLY RANGE: 2.0V to 5.5V
PROGRAMMABLE DATA RATE: 8SPS to 860SPS
$ 0.01
Quick Info :
CAN Controller : MCP2515
CAN Transceiver : TJA1050
Operating Voltage: 5V
Interface: SPI
$ 0.01
Quick Info:
Programmer IC : CH341B
Supported Voltage : 1.8V / 3.3V / 5V
Supported Chips : 24Cxx / 25Cxx EEPROM
Clip : SOIC8 / SOP8 Test Clip
Adapter : SOP8 to DIP8 Converter
Interface : USB
$ 0.01
Quick Info :
Type: External TV Tuner Box
Connectivity: VGA
Features: PIP function, FM Radio, Built-in Speaker
Compatibility: LCD, LED, and CRT monitors
$ 0.01
Quick Info :
Perfect for experimentation and prototype work
Brings all 9 pins of a DB9 connector to screw terminal blocks
Adapter used for communication debug
9 pcs signal line was all lead out, name and number clearly labeled;
$ 0.01
Quick Info :
Type: DB9 Male Connector Breakout Board
Terminals: 9 screw terminals (labeled)
Standards: RS232, RS485, RS422 compatible
Wire: 16-26 AWG
Use: Serial communication, PLC, industrial automation, testing
$ 0.01
Quick Info :
Module Size: 2.8cm * 1.3cm
Applicable connector: 5.5 * 2.1mm
Power output interface: 2 channel VCC, 2 channel GND
Net Weight: 3.2g
$ 0.01
Quick Info :
Type: DVI-D ↔ HDMI passive adapter
Direction: Bidirectional
Resolution: Up to 1080p Full HD
Audio: Not supported
Power: None required (passive)
Compatible: PC, Raspberry Pi, monitors, projectors
Signal: Digital video only
$ 0.01
Quick Info :
Compatible: ESP-01, ESP-07, ESP-12, ESP32
Interface: USB to Serial (CH340/CP2102)
Power: 3.3V regulated output
Features: Auto-reset, GPIO breakout, boot mode switches
Programming: Arduino IDE, ESP-IDF, MicroPython
Use: ESP development, testing, firmware flashing, IoT projects
$ 0.01
Quick Info :
Compatibility: 30-pin & 38-pin ESP32 boards
Terminals: Screw terminal blocks (3.81mm pitch)
Power: No onboard regulation (uses ESP32 power)
Wire Support: 22-28 AWG
Size: ~75mm x 55mm
Assembly: Plug-and-play design
Mounting: 4 mounting holes included
$ 0.01
Quick Info :
Type: 44-pin expansion breakout board
Compatible: ESP32-S3 development boards
Terminals: Screw terminal blocks (1→2 expansion)
Spacing: 25.4mm (44-pin)
Size: 80mm x 58mm
No Soldering Required
$ 0.01
Quick Info :
Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
Integrated +3.3V level converter for USB I/O
Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
$ 0.01
Quick Info :
IC : HX711 (24-bit delta-sigma ADC)
Input Channels : 2 differential (Ch. A & Ch. B)
Programmable Gain : 32 / 64 / 128
Output Data Rate : 10 SPS / 80 SPS (selectable)
Operating Voltage : 2.7V – 5V DC
Operating Current : < 1.5mA
Interface : 2-wire (SCK + DT)
Operating Temp : -20°C to +85°C
Compatible Boards : Arduino / ESP32 / Raspberry Pi / STM32
$ 0.01
Quick Info :
4 channels can convert up to 4 logic signals
Can convert between 1.8V, 2.8V, 3.3V and 5V logic circuits
Bi-directional so can work with bi-directional buses such as I2C
Utilizes N-Ch MOSFET transistors for level translation
$ 0.01
Quick Info :
Type: Bi-Directional Level Shifter
Channels: 8 Independent
Voltage: 5V ↔ 3.3V
Speed: Up to 400kHz
Applications: I2C, SPI, UART, GPIO
$ 0.01
Quick Info :
Resolution: 12 -bit (4096 steps)
Interface: I²C
Key Feature: Internal EEPROM
Voltage Range: 2.7V – 5.5 V
Use: Analog Signal Generation
$ 0.01
Quick Info :
USB Type : Micro USB
Header : 2.54mm
Material : Plastic
Size(L*W) : Approx. 26.06 x 22.93mm
$ 0.01
